This page is also available in English.
For architects & designers
We take the details from your project — laser-cut facades, railings, stairs, pergolas, custom furniture — turn them into shop drawings, make samples and fabricate them in our workshop. You approve every step before production.
What we fabricate from your project
From a reception panel to a 1,500 m² facade — same cutting precision, same finish, same documentation.
01Ventilated facade cassettes, sunshades and screens laser-cut to your pattern, with substructure and fixing system designed by us.
02Glass, stainless or laser-panel railings, steel stairs with wood, glass or sheet treads — for premium homes, offices and apartment buildings.
03Screens, cladding, shelving, tables, consoles, light fixtures and signage — one-offs or small series, to the interior detail.
04Canopies, pergolas, walkways and light exposed structures — fabricated to the structural design, with clean details and concealed connections.
How we work with architects
We know the detail matters: the bridges in the panel, the bend radius, the coating thickness, how the screw is seen. That's why we work from validated shop drawings and samples, not from "approximately".
We turn DWG / DXF / IFC into workshop drawings with all dimensions, thicknesses and fixings — approved by you and the structural engineer.
We make material, pattern and colour samples before production; the approved sample becomes the reference for the whole project.
We tell you early what can be cut, bent and welded at the chosen thickness — and propose alternatives that keep the design intent.
Data sheets, material certificates, coating thicknesses, declaration of conformity — for execution details and handover.
Coordinated facades, railings, stairs, gates, urban furniture and canopies — same RAL, same workshop, same deadlines.
We fabricate both the one-off piece for a villa and the series of 300 balconies for a development — from the same jig.
Materials & finishes
Usual materials and finishes in architectural projects. For special combinations (brass + corten, PVD stainless, thermo-treated wood) we request supplier samples and validate them together.
| Material | Thickness | Finishes | Typical applications | Notes |
|---|---|---|---|---|
| Galvanised steel + RAL | 1.5 – 6 mm | Matt, textured, metallic, any RAL | Facades, railings, gates, furniture | Standard for outdoors |
| Corten | 2 – 6 mm | Natural or accelerated patina | Facades, planters, signage | Drainage details for paving |
| Stainless 304 / 316 | 1.5 – 3 mm | Brushed, mirror, PVD coloured | Railings, interiors, coast | 316 for saline areas |
| Aluminium | 2 – 4 mm | RAL, anodised | Light facades, sunshades | Large cassettes, low weight |
| Brass / bronze | 1 – 3 mm | Brushed, patinated, lacquered | Interiors, receptions, furniture | Small series, one-offs |
| Laminated glass | 8.8.4 – 10.10.4 | Clear, frosted, tinted | Railings, screens | Load calculation included |
How we work
Send the details (DWG / DXF / IFC / PDF) and the design intent. We confirm manufacturability and propose adjustments.
You receive workshop drawings and physical samples; you approve them with the client and the structural engineer.
Laser cutting, bending, welding, grinding, galvanising, RAL coating or patination — dimensional check on every piece.
We deliver labelled by position, with installation plan and documentation — the contractor's crew installs to our plan.
FAQ
From your drawings, first of all. We receive DWG / DXF / IFC / PDF, turn them into shop drawings and validate them with you. Our pattern library is just a starting point.
Yes. Material, pattern and colour samples (300 × 300 mm) are made before production at minimal cost, and the approved sample becomes the contractual reference.
No. We deliver finished pieces, labelled by position, with installation plan, fixings and documentation. Installation is done by the contractor's crew; for facades we work directly with the facade contractor.
DWG shop drawings, data sheets per item, material certificates, finish sheet (RAL, coating thickness) and declaration of conformity. For railings and canopies, the load calculation sheet.
Yes — that's the main advantage: facade, railings, gates, urban furniture and canopies from one workshop, in the same RAL, on the same deadline.
Yes. We deliver across the EU, palletised and individually packed, with intra-community invoicing. For large projects we come on site for the survey and sample approval.
Discuss your project
Attach the drawings (DWG / DXF / PDF), tell us the desired material and finish, area or number of pieces and the site deadline.
WhatsAppUsamos cookies para mejorar su experiencia. Política de Cookies