This page is also available in English.
Custom metal railings
Balcony, stairwell and terrace railings for residential developments, apartment blocks and office buildings. Designed from site survey, produced in series from the same jig, delivered in stages by stairwell and floor — ready to install.
Systems
For one building or a whole development — same profiles, same finish, same fixings across the entire building.
01Series balcony and loggia railings for apartment blocks and developments: vertical bars, horizontal louvres or perforated / expanded sheet panels, fixed on the slab or to the beam face.
02Handrails and railings for apartment stairwells, lobbies and office buildings: continuous profiles over several levels, with side or tread fixing.
03Railings and handrails for escape stairs, access ramps, above-ground car parks and walkways — hot-dip galvanised, sized for heavy traffic.
04Railings with laminated safety glass and stainless / RAL-coated steel posts or channels, for premium balconies and terraces, receptions and office buildings.
For developers & contractors
We work with apartment and development developers, general contractors and designers. On 300 balconies it's not just the model that matters, but the survey, repeatability, the floor-by-floor schedule and the handover documents.
We measure balconies and stairs by type, standardise the modules and adapt only the exceptions — fewer unique parts, fewer installation errors.
We build the first balcony and the first stair section, validate them with the site manager and architect, then produce the series from the same jig.
We deliver in batches, labelled by stairwell / floor / apartment, synchronised with the finishing schedule — no stock on site.
DWG shop drawings, fixing details, horizontal load calculation sheet, material certificates and declaration of conformity.
Railings, gates, fences, carports, canopies, letterboxes and urban furniture — same RAL, same workshop.
The quote is locked for the whole development, with invoicing by delivery stage.
Materials & finishes
Posts from 40×40 – 60×60 mm profiles, handrail from 40×40 / 50×30 mm profile or Ø 42 mm tube, infills from 12×12 – 20×20 mm bars, louvres or 2–3 mm perforated sheet. Standard protection: galvanising + RAL powder coating.
Popular colours
RAL 7016
Antracit
RAL 9005
Negru intens
RAL 7024
Gri grafit
RAL 9006
Aluminiu alb
RAL 9016
Alb trafic
Inox
Periat / satinat
The standard for balconies and exterior stairs: zinc + powder layer, matt or textured, any colour.
For stairwells and lobbies — uniform finish on all levels, touch-up friendly.
Brushed or satin, for receptions, premium terraces and hygiene-sensitive areas.
8.8.4 – 10.10.4 mm, clear, frosted or tinted, held in base channels or with clamps.
Usual dimensions & requirements
Dimensions are taken from the site survey and the architectural project. Heights and gaps comply with the applicable standards for residential and public buildings.
| Element | Height | Gap between elements | Fixing | Notes |
|---|---|---|---|---|
| Balcony railing | 1.00 – 1.10 m | max. 10 cm (bars) / 12 cm (horizontal) | On slab (anchors) or to beam face | No climbable elements below 0.60 m |
| Stairwell railing | 0.90 – 1.00 m | max. 10 cm | Side to stringer or on tread | Continuous handrail at landings |
| Exterior / escape stair | 1.00 – 1.10 m | max. 10 cm | On stair structure or slab | Hot-dip galvanising mandatory |
| Access ramp | 0.90 – 1.00 m + 0.60 – 0.75 m | — | Side | Double handrail, extended 30 cm |
| Glass railing | 1.00 – 1.10 m | panels 0.8 – 1.5 m | Embedded base channel or posts | Laminated glass, load calculation |
Indicative values. Final sizing follows the project and applicable standards; the horizontal load calculation sheet is delivered with the documentation.
No installation — complete delivery
HEAVY METAL designs and manufactures; installation is done by the contractor's crew following our fixing plan. Every section arrives labelled by stairwell, floor and apartment.
Welded, ground, galvanised and coated railings in sections of max. 3 m, with concealed joints.
Pre-drilled base plates, chemical or mechanical anchors sized for concrete, cover caps.
Continuous handrail, bends and connectors at landings, end caps, expansion elements.
Bars, louvres, perforated panels or laminated glass cut to size, with gaskets and clamps.
Drawing for every stairwell and floor, with anchor positions and section order — parts labelled by apartment.
DWG drawings, load calculation sheet, material certificates, declaration of conformity for handover.
How we work
Send the architectural plans (or facade elevations), number of balconies and stairs and the desired model. We propose 2–3 directions.
We measure on site after the slabs are cast, build the first balcony for approval and lock the quote for the whole series.
Laser cutting, jig welding, grinding, galvanising, RAL coating, dimensional check on every batch.
We deliver by stairwell and floor following the finishing schedule, palletised and labelled by apartment, across Romania and the EU.
Spec sheet
FAQ
The price depends on model, infill, finish and — decisively — the number of balconies and degree of standardisation: for identical series the cost per linear metre drops considerably. Send us the plans and number of balconies and you get a firm quote for the whole series within 24h.
Yes, it's our speciality. We standardise balconies from the survey, build a prototype approved on site and produce the series from the same jig, delivered by stairwell and floor following the finishing schedule.
Yes. Heights, gaps between elements and horizontal handrail loads are sized to the applicable standards for residential and public buildings. The calculation sheet is delivered with the handover documentation.
No. We deliver fully finished sections with base plates, anchors, fixing plan and parts labelled by stairwell / floor / apartment. Installation is done by the contractor's crew — bolted and anchored, no welding on site.
The survey takes place after slabs and parapets are cast, before finishes. For series we measure by balcony type and check exceptions to reduce unique parts.
Yes. We receive DWG / DXF / PDF, turn them into shop drawings and validate them with the designer before the prototype.
Yes, palletised across the EU (Germany, Austria, Italy, France) in 3–6 working days, with intra-community invoicing.
Quote in 24h
Mention the desired model (or a reference), number of balconies and stairs, site stage and estimated schedule. For a single stair or balcony, simply send us the dimensions and a photo.
WhatsAppUsamos cookies para mejorar su experiencia. Política de Cookies