01CNC laser cutting
We cut steel, stainless, aluminium, corten and brass sheet straight from your DXF / DWG / STEP files.
- Steel up to 20 mm, stainless 12 mm, aluminium 10 mm
- Format 3,000 × 1,500 mm
- Tolerances ±0.5 mm
Metal processing services
Four processes, one workshop, one responsibility
Laser cutting, press-brake bending, welding and powder coating under one roof. We take your files and deliver finished parts or assemblies — no transport between suppliers, no dimensions that don't match.
- Full flow in our own workshop
- From prototype to series
- Delivery Romania & EU
Services
What we do, concretely
Each process has its own page with technical parameters, applications and FAQ. Together they cover the whole way from sheet to finished assembly.
01
02CNC press-brake bending
We turn cut parts into profiles, housings, frames and cassettes with constant angles across the whole series.
- Sheet up to 12 mm
- Lengths up to 3,000 mm
- Repeatable angles ±0.5°
03Powder coating
Uniform, durable finish in any RAL, with degreasing and phosphating pre-treatment, for small and large parts.
- Any RAL · matt, gloss, textured
- Controlled 60–120 µm film
- Parts up to ~6 m
04MIG / TIG / laser welding
Assemblies welded in fixtures, inspected piece by piece — steel, visible stainless and aluminium.
- MIG / MAG · TIG · laser
- Thickness 0.5 – 20 mm
- Inspection on every assembly
Why in-house
One supplier for all your metal
When cutting, bending, welding and coating happen in the same place, dimensions match, deadlines hold and responsibility is single. For you that means fewer trips, fewer surprises and a price per assembly, not four invoices.
- 01
Dimensions that match
The flat pattern is computed on our tooling, parts are welded in our fixtures — the assembly comes out right first time.
- 02
One deadline
You don't wait for three suppliers. We plan the internal flow and confirm a single delivery date.
- 03
One responsibility
If something is off in dimension or finish, we answer for it — no finger-pointing between suppliers.
- 04
Price per assembly
We quote the finished part or assembly, not separate operations — you know the cost from the start.
- 05
Files, not phone calls
We work from DXF / DWG / STEP, validate before cutting and archive programs for the next orders.
- 06
Capacity for series
Nesting, welding fixtures and planned coating batches — from prototype to thousands of parts a month.
Capabilities
Materials, thicknesses and sizes at a glance
A summary of the parameters we work with routinely. Full details are on each service page; for special requests, ask us.
| Process | Materials | Thickness | Dimensions | Tolerances / finish |
|---|---|---|---|---|
| Laser cutting | Steel, stainless, aluminium, corten, brass | 0.5 – 20 mm | 3,000 × 1,500 mm | ±0.5 mm, burr-free edge |
| Press-brake bending | Steel, galvanised, stainless, aluminium | 0.5 – 12 mm | length 3,000 mm | angle ±0.5°, visible faces protected |
| Welding | Steel S235 / S355, stainless 304 / 316, aluminium | 0.5 – 20 mm | assemblies up to ~12 m | visual + dimensional inspection, PT / UT on request |
| Powder coating | Steel, galvanised, aluminium, stainless | — | parts up to ~6 m | any RAL, 60–120 µm film |
Production flow
From sheet to finished assembly
Four processes linked in one flow. The part doesn't leave the workshop until it is finished.
01
Cutting
Your files become flat parts — optimised nesting, clean edges, position marking.
02
Bending
Flat parts become profiles, housings and frames — first part validated, repeatable series.
03
Welding
Parts become assemblies — in fixtures, inspected piece by piece, seams prepared for finishing.
04
Coating
Assemblies get their final finish — pre-treatment, RAL powder, curing, packing and delivery.
FAQ
What partners ask us
Can I order a single process, e.g. only cutting?+
Yes. Each service can be ordered separately — we receive your files or parts and perform only the requested operation. The advantage of the full flow is that you no longer move parts between suppliers.
Do you work with private clients or only companies?+
Mainly with companies — workshops, builders, manufacturers, architects — but we also answer requests for custom projects if there are files or a clear drawing.
Which files should I send?+
Ideally DXF / DWG at 1:1 or STEP for bent parts and assemblies. We also accept dimensioned PDFs or sketches — we redraw them and send them for approval before production.
How long does a quote take?+
Usually 24h from receiving files and quantities. For complex assemblies or large series, 24–48h.
Do you also install?+
No. We produce in the workshop and deliver finished parts or assemblies, ready for installation, with the necessary documentation. Installation is done by your team or the contractor.
Do you deliver outside Romania?+
Yes, across the EU — Germany, Austria, Italy, France, Benelux — on pallet or trailer, in 3–6 working days, with intra-community invoicing.
Quote within 24h
Send us your files and quantities. We reply with price and lead time.
Tell us which processes you need — one or all four — material, thicknesses and quantities. If you only have a sketch, send it: we turn it into a production-ready file.
